Why Everyone Is Talking About Ghost 2 Immobiliser Reviews Right Now
Ghost 2 Immobiliser
Ghost is an electronic security system that wirelessly safeguards your car from key-cloning and hacking. It connects to the ECU unit through the CAN data network and is silent and isn't identified by thieves.
You can only disarm it by pressing the sequence of buttons (like PIN code) you have programmed into your car using buttons on the steering wheel as well as the the centre console.
Protects Your Car from Theft
Car theft is on the rise, and cars are taken in a matter of minutes. It is important that car owners think about the extra security measures they can take. An immobiliser is one of the most effective and most dependable methods of keeping your vehicle safe. Ghost immobilisers are an excellent option as they are small, concealed within the wires of your vehicle, and do not emit any radio frequency signals. This means they are not traceable and can be fitted without affecting your vehicle's CAN bus.
Unlike other immobilisers that rely on keypad inputs, tags or the exact sequence of buttons to disable them the ghost immobiliser that is located near me is only disabled by the pin code that was set up by us at the time of installation. This unique disarm sequence uses the existing buttons within your vehicle, such as the ones on your steering wheel, doors or centre console to stop anyone from starting and driving your car away. This makes it impossible for thieves to clone your key or use jamming/spoofing devices which could disable normal immobilisers.
A ghost immobiliser stop your vehicle from being driven and parked, it also prevents the car from being smashed to make parts. This is a growing issue in the UK due to the increasing popularity of these cars. It can happen within minutes. TTW ghost immobilisers can be programmed to shield vehicles from such attacks.
Installing our ghost 2 immobiliser will prevent your vehicle from being stolen at a service station or even if your car is driven into the garage by employees. The Ghost can be set to Service/Valet Mode which will only allow you, the consumer, to enter a unique button combination.
If you'd like to learn more about our ghost immobilisers, or need a free quote, please contact us today. We are happy to assist you and provide peace of mind knowing that your vehicle is protected for all times.
There is no LED or key fob to give away its whereabouts
Secure your vehicle from the newest type of theft by using this non-detectable immobiliser which is integrated into your cars CAN data network. Contrary to other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators to function instead it uses buttons in the standard factory controls already in your vehicle, such as those on the steering wheel, door panels, and the center console. This means that a secret pin code is created that must be entered before your vehicle starts, making it completely undetectable to thieves.
The CAN-BUS immobiliser developers have also added extra high-security methods in to prevent the device from being breached or hacked. It also offers CANBUS blocking and physical immobiliser cuts, which means that even when you lose your keys the criminal won't be able to steal your car with your joy and pride.
Installing the CAN BUS in your vehicle is a simple and easy procedure that only takes 30 minutes. We will have one of our staff in your area to schedule an appointment time and location that suits your needs. After your vehicle has been fitted, you will be given a registration number and unique security codes for your phone as well as the app will make it simple to use and ensure you are always in control of your car's security.
The system is compatible with most modern vehicles, however If you own a classic or specialist car Contact us to check compatibility. The cost of installation and supply of The Ghost Immobiliser 2 is APS449 and your car will be added to the International Security Register if fitted by one of our approved installers. If you have any queries, don't hesitate to get in touch with our helpful team. We're looking forward receiving your call soon.
Easy To Set Up And Programming
Modern cars are usually fitted with immobilisers to prevent thieves from hot-wiring or stealing your car. Contrary to physical deterrents such as locking your steering wheel or wheel clamps an immobiliser is covertly integrated inside your vehicle, making it virtually impossible to find and defeat.
The system is connected directly to your vehicle's CAN data network and stops the vehicle from starting unless you input a unique personalised code. The device is compact and sealed, meaning it can be installed anywhere inside your vehicle, without the need for the need for additional wiring. It also doesn't emit any radio frequency signals therefore it isn't detected by RF scanners or code grabbing equipment used by thieves.
Ghost uses your vehicle's existing buttons on the steering wheel doors, door panels and the centre console to create a customisable disarm sequence (like PIN codes) that must be entered to authorize the start-up of your vehicle. The pin code sequence is based on four to 21 button presses and can be easily changed when required. You can also put the vehicle in Service/Valet Mode to ensure that it's still operational but it will not start or drive. auto ghost immobiliser will ensure that your vehicle is safe when you bring it to the mechanic for valet parking or service and that the mechanic cannot access your pin code to disable your system.
If you are away from your vehicle for a long time, such as on a vacation or business trip You can use our app to obtain temporary pin. You can also enter your pin code manually when you wish to drive the vehicle.
Our CAN bus immobiliser is also compatible with a remote keyfob or tracker. (Brand dependent) This will give priority to the ghost system. This can provide additional security in the event that your vehicle is stolen or keys are lost.
If you're looking for a way to protect your vehicle from key-cloning and hacking, call us today to see how we can help. We offer our services throughout the UK and also at our installation center in Derby.
Service/Valet mode
Modern cars have sophisticated eco systems with stop/start systems that require the proper inputs to function effectively. For instance the voltage of the battery as well as engine temperatures, external temperatures, and the electrical systems that are in use. Sometimes, these issues can be a cause of concern and can often be difficult to diagnose if it is Ghost related or not. This is especially true if your vehicle has recently been serviced or valet-parked. If this is the case you can go into the ghost mode which allows the vehicle to be driven and start up without the need for a pin code. This is useful when your car is being maintained by an independent garage or valet-parked.
To enter service mode, press the service button 5 times. The indicator signal will flash twice when service mode is selected. You can exit this mode at any time by entering a PIN code. After you exited the service mode the Ghost immobiliser will go back to normal operation.
This is a discreet system that communicates with the vehicles ECU on the CAN data circuit, which connects directly to the original vehicle buttons, and not using radio frequency signals as other immobilisers. This makes it nearly impossible for any other device to hack or bypass or jam devices that mimic codes from the original key fob do not affect the system.
It is a TASSA certified anti-theft device that meets the highest protection standards. It also has an exclusive vehicle marking system that is linked to the international security register, which is a requirement of insurance companies.
The ghost immobiliser is a tiny unit that can be easily hidden within your vehicle's factory wiring. This makes it almost impossible for thieves. It is a sealed unit that is so small it can be placed in different places in the vehicle, including under the dashboard or on the steering wheel.
The system makes use of buttons in your vehicle such as those on the steering wheel, door panels or the centre console, to allow you to create a unique and changing disarm sequence of up to 20 presses that must be completed to start your vehicle. Anyone with your unique pin code can use it, so you, your family, your friends or colleagues can use it.